|
[ Index ]
Related:
|
|
Strategies
-
Material/Waste
Building Materials and
Products
Concrete Reuse
Waste Management
[Building
Materials and Products]
-
Anderson, J., et al., 2002.
The
Green Guide to Specification, 3rd ed., Blackwell Science, Oxford. [LB
691.0942 H8]
-
Anink, D., Boonstra, C. and
Mark, J., 1996. Handbook of Sustainable Building: An Environmental Perference
Method for Selection of Materials for Use in Construction and Refurbishment,
James & James, London. [720.47
A59]
-
Berge, B., 2000. The Ecology
of Building Materials, Architectural Press, Oxford. [691
B49]
-
Bradley, R., 1995. Environmental
Impact of Building and Construction Materials, Volume F: Paints and
Coatings, Adhesives and Sealants, Construction Industry Research and Information
Association, London. [667.6
B79]
-
BSRIA, 1998. Environmentally
Friendly Cooling Products, BSRIA Technical Memorandum TM 16/98, Building
Services Research and Information Association, Bracknell, Berkshire, UK.
[697.93 E61]
-
BSRIA, 1998. Environmentally
Friendly Heating Systems: Selection, Desgin and Specification, BSRIA
Technical Memorandum TM 17/98, Building Services Research and Information
Association, Bracknell, England. [697
E61]
-
BSRIA, 1998. Environmentally
Friendly Lighting Products, BSRIA Technical Memorandum TM 18/98, Building
Services Research and Information Association, Bracknell, England. [621.32
E61]
-
BSRIA, 1998. Environmentally
Friendly Water Systems, BSRIA Technical Memorandum TM 19/98, Building
Services Research and Information Association, Bracknell, England. [628.1
E61]
-
Clough, R. H., 1995. Environmental
Impact of Building and Construction Materials, Volume D: Plastics and Elastomers,
Construction Industry Research and Information Association, London. [P
691.92 C64]
-
Curwell, S., et al., 2002. Hazardous
Building Materials: A Guide to the Selection of Environmentally Responsible
Alternatives, 2nd ed., Spon, London. [LB
691.0289 H42]
-
Howard, N., 1998. The Green
Guide to Specification: An Environmental Profiling System for Building
Materials and Components, Centre for Sustainable Construction, Building
Research Establishment, Watford. [P
691.0942 H8]
-
Designing with Vision: A
Technical Manual for Material Choices in Sustainable Construction,
California Environmental Protection Agency, Integrated Waste Management
Board, Sacramento, California, 1999. [624.18
D45 C15]
-
Fox A. and Murrell, R., 1989.
Green
Design: A Guide to the Environmental Impact of Building Materials,
Architecture Design and Technology Press, London. [691
F79]
-
Frechette, L. A., 1999. Build
Smarter with Alternative Materials, Craftsman Book Company, Carlsbad,
California. [691
F851 b]
-
Gertsakis, J., Abdilla, M. &
McLaren, W., 1999. Ecospecifier: A Guide to Sourcing Environmentally
Preferable Materials, Centre for Design at RMIT University, Melbourne.
[LB 363.7282
G38 e]
-
Hendriks, C. F., et al., 2000.
Durable
and Sustainable Construction Materials, Aeneas, Netherlands. [624.18
D947 H4]
-
Hendriks, C. F., Nijkerk, A.
A. and van Koppen, A. E., 2000. The Building Cycle, Aeneas, Netherlands.
[691
H49]
-
Howard, N., Edwards, S. and
Anderson, J., 1999. BRE Methodology for Environmental Profiles of Construction
Materials, Components and Buildings, Construction Research Communications
by permission of Building Research Establishment, Garston, Watford. [P
691 H84]
-
Howard, N., 1995. Environmental
Impact of Building and Construction Materials, Volume C: Metals, Construction
Industry Research and Information Association, London. [P
691.8 H8]
-
Mumma, T., 1995. Guide to
Resource Efficient Building Elements, 5th ed., Center for Resourceful
Building Technology, Missoula, Mont. [R
691.029473 M9]
-
Moss, G., King, J. and Saville,
A., 2001. Building Services: Component Life Manual, Blackwell Science,
London. [LB 690.24
M9]
-
Newton, J., 1995. Environmental
Impact of Building and Construction Materials, Volume E: Timber and Timber
Products, Construction Industry Research and Information Association,
London. [691.1
N55]
-
Paehlke, R., 1993. Ecological
Carrying Capacity Effects of Building Materials Extraction, Forintek
Canada Corp., Ottawa. [333.8
P1]
-
Spiegel, R. and Meadows, D.,
1999. Green Building Materials: A Guide to Product Selection and Specification,
Wiley, New York. [691.029473
S755 g]
-
St. John, A. (ed.), 1992. The
Sourcebook for Sustainable Design: A Guide to Environmentally Responsible
Building Materials and Processes, Architects for Social Responsibility,
Boston Society of Architects, Boston, Mass. [691
S7]
-
Stulz, R., 1983. Appropriate
Building Materials, 2nd non-rev. ed., Skat, St. Gallen, Switzerland.
[691
S95]
-
Stulz, R. and Mukerji, K., 1988.
Appropriate
Building Materials: A Catalogue of Potential Solutions, Rev. enl. ed.,
SKAT, St. Gallen, Switzerland. [691
S95]
-
Treloar, G., Fay, R. and Tucker,
S. (eds.), 1998. Proceedings of the Embodied Energy: the Current State
of Play, seminar held at Deakin University, Woolstores Campus, Geelong,
Australia, Thursday 28th - Friday 29th November, 1996, organised by the
Australian Sustainable Materials Group, School of Architecture and Building,
Deakin University, Australia. [720.472
P96]
-
Wayne B. Trusty & Associates
Limited, 1994. Assessing the Relative Ecological Carrying Capacity Impacts
of Resource Extraction, Forintek Canada Corp., Ottawa, Ontario. [333.80971
W3]
-
Wilson, A. and Malin, N. (eds.),
2002. GreenSpec Directory: Product Directory with Guideline Specifications,
3rd ed., BuildingGreen, Brattleboro. [R
691.025 G8]
-
Woolley, T., et al., 1997. Green
Building Handbook: a Guide to Building Products and Their Impact on the
Environment, E & FN Spon, London. [LB
691 G7 v.1 & v.2]
[Concrete
Reuse]
-
De Pauw, C. and Lauritzen, E.
K. (eds.), 1993. Disaster Planning, Structural Assessment, Demolition
and Recycling: Report of Task Force 2 of RILEM Technical Committee 121-DRG,
Guidelines for Demolition and Reuse of Concrete and Masonry, E &
FN Spon, London. [624.1834
I62]
-
Kasai, Y. (ed.), 1988. Demolition
and Reuse of Concrete and Masonry: Proceedings of the Second International
Symposium held by RILEM (the International Union of Testing and Research
Laboratories for Materials and Structures), November 7-11, 1988, Tokyo,
Japan, Chapman and Hall, London. [693.1
D38 v.1 & v.2]
-
Lauritzen, E. K. (ed.), 1994.
Demolition
and Reuse of Concrete and Masonry: Guidelines for Demolition and Reuse
of Concrete and Masonry, Proceedings of the Third International RILEM
Symposium on Demolition and Reuse of Concrete and Masonry, 24-27 October,
1993, Odense, Denmark, E & FN Spon, London. [693.1
I61 D03]
[Waste
Management]
-
Cheung, C. M., 1993. Guidelines
for Reduction of Construction Waste on Building Sites, Dept. of Building
and Real Estate, Faculty of Construction and Land Use, Hong Kong Polytechnic,
Hong Kong. [HKP
363.7285 C52]
-
Coventry, S. and Guthrie, P.,
1998. Waste Minimisation and Recycling in Construction -- Design Manual,
Construction Industry Research and Information Association, London. [P
628.4458 C87 w]
-
Ferguson, J., et al., 1995.
Managing
and Minimising Construction Waste: A Practical Guide, Telford, London.
[P 363.7285
M26]
-
Howard Humphreys & Partners,
1994. Managing Demolition and Construction Wastes: Report of the Study
on the Recycling of Demolition and Construction Wastes in the UK, H.M.S.O.,
London. [363.7280942
H8]
-
University of Western Ontario.
Centre for Studies in Construction, 1994. Demolition and Disposal,
submitted by the Centre for Studies in Construction to Forintek Canada
Corp., Ottawa, Ontario, Canada. [363.728
U5]
-
Zev Kalin & Associates Inc.,
1993. The State of Demolition Waste Recycling in Canada, Forintek
Canada Corp., Ottawa, Ontario, Canada. [363.7282
Z6]
|